2021 Woodworking Drill Locator Portable drilling locator Woodpeckers precision locator Adjustable Drilling Guide Auto-Line Drill Guide Fence Hand Tools Vertical Guide Tool Kit (Red)

Portable drilling locator woodworking drilling locator drilling guide

Feature

Some of us can pick up a drill bit, place it on the workpiece and drill a straight hole. Then, there is our remaining 99.9%. Drilling machines can solve this problem... as long as the workpiece you want to drill is suitable. However, if you are not one of the 0.1%, and you want to drill in the middle of a large piece of plywood or in an installed cabinet or wherever you cannot use a drill press (or you don’t want to have a drill press), this new tool can drill holes in you Keep your drill bit perfectly vertical, but it goes O NE STEP further. We have added a multifunctional base and fence system so that you can easily keep the hole position on the target.

The automatic line starts with a high-quality 1/2" chuck supported by a pair of sealed ball bearings. The shaft end is a standard quick release accessory, suitable for any cordless or corded electric drill...even an impact driver. The chuck holder is equipped with a pair of poly Tetrafluoroethylene sleeve, used to ride on two stainless steel posts to keep the chuck completely vertical when drilling. One post has a spring to help you control your cutting, and the other post has an adjustable stop ring . Note that there is a taper on the stop ring column. Stop only by pressing with your fingertips to keep the position... When it is locked to the taper, it is almost impossible to knock the stopper out of position.

-Line's base has a laser-engraved centerline around the opening. Just align the bright white index mark with the witness mark on your stock to get the precise hole location. There is a V-shaped groove on the base, which can safely drill round blanks. The opening in the base allows a G A P for the drill bit, which can be up to 1 inch. When you need to drill a hole larger than 1", just remove the column cover, turn the chuck bracket so that it is on the outside of the base, and then drill a hole up to 2".

• When you need the hole to be centered on the board, install the centering pin on the base and rotate it until one pin fits snugly on each side of the stock. Your position is now completely centered. It is suitable for stocks up to 3-1/2" wide. The centering pin can be conveniently stored on the top of the base when not in use. We processed an Allen key to install the pin to the bottom of the column cap... You never have to Sort the coffee cans filled with Allen wrenches to find the right one..
• Drilling Wood More Accurately:The best woodworking drill locator in 2021 is designed to make drilling of wood easier, straighter and more accurate.With a 1/4 inch hexagonal shaft, it can be used with cordless and corded drills and impact drivers..
• Easy to Use: Our woodworking drill locator the chuck carrier has a 1 drill bit capacity, but if you remove it and reverse it, you can fit bits up to 2 wide.A v-groove in the base allows for easy centered drilling of round stock such as wood dowels.
• Multiple Methods of Use:The fence can be attached to any of the 4 sides of the quare base.Additionally, the fence can be used in multiple orientations. Here, its used to refence against the edge of a board..
• Fully Equipped:With keyed chuck, tapered depth control shaft and limit ring, spring return, reversible chuck bracket, built-in V-groove, alignment and adjustable fence..